High pressure grease pump adopts pressed air as power. It drains grease by high pressure produced by the grease based on the pump. It is necessary equipment in draining grease machinery. The features are safety and easily operation' little air of consumption, high production efficiency and low labor, it could drain all kinds of lithium based grease with high viscosity. It is suitable for car and tractor and other machine draining lubricating.
- Compression ratio: 50: 1
- Work pressure: 5-6 bar t
- Transfer pressure: 250-300 bar
- Speed of transferring oil: 500G/min
1. Connect the grease pump with grease hose and grease gun, then insert into the tank. (The customer can select the grease hose and grease gun and other parts).2. Connect pressed air 5-6 bar, the pump will work normally. The pump will filI with grease, and the pressure will increase. The pump will move up and down slowly a moment later, the pressure will be the max. when it stops moving. Press the handle of grease gun, the grease will go out from the gun. Check all the parts carefully when the pressure is max., it could drain grease if no leak.3. If the grease is too thick, it should add oil that with the same function to dilute until the grease could move on a level.